CH510
CH510 is a macroporous polystyrene chelating resin with aminophosphonic groups. Main application: brine decalcification (softening). Suitable system: chlor-alkali processes.
Inquire Now
Tel: +86 15612044421
Product Introduction
CH510 is a macroporous polystyrene chelating resin with aminophosphonic groups. Main application: brine decalcification (softening). Suitable system: chlor-alkali processes.
Typical Physical & Chemical Properties
| Polymer matrix | Macroporous polystyrene crosslinked with divinylbenzene |
|---|---|
| Appearance | Spherical granules |
| Functional group | Aminophosphonic |
| Ionic form | Na+ form |
| Cu exchange capacity (min) | 20 g/L |
| Water retention | 55–65 % (Na+ form) |
| Particle size distribution | 425 - 850 µm |
| < 425 µm (max) | 2 % |
| Uniformity coefficient (max) | 1.4 |
| Swelling, H+ → Ca2+ (max) | 20 % |
| Swelling, H+ → Na+ (max) | 50% |
| Specific gravity | 1.13 |
| Packaging density (approx.) | 710 - 760 g/L (44.4 - 47.5 lb/ft³) |
| Operating temperature range | 90 °C (194.0 °F) |
Handling, Storage & Loading Notes
- Transport & storage. Store the resin in its wet state, preferably above 0 °C. For long idle periods, keep the container closed or add brine of ≥5% NaCl. Protect from freezing during transport, and do not stack heavy objects on top of the resin to avoid crushing the beads.
- Pre-treatment. For general requirements, one alkaline → water → acid → water cycle is sufficient; for strict requirements, perform three cycles and finish with the required ionic form.
- Loading. Allow for the swelling on form conversion and leave enough freeboard to prevent overflow while keeping a proper liquid level. Keep the column aspect ratio in a reasonable range to avoid channeling. Load wet or backwash to remove air bubbles from the bed.
- Feed quality. Before entering the resin column, the liquid should be coagulated, filtered or sand-filtered to ensure it is free of suspended solids that could clog the resin pores.
- Idle columns. Resin left idle in a column for a long time must be washed out and stored clean, or kept submerged in brine; it must never dehydrate. Backwash from time to time to loosen the bed and prevent caking.