CA1500
CA1500 is a macroporous strong acid cation exchange resin in H+ form for use as a catalyst. Main applications: etherification, aromatic alkylation and phenol purification.
Inquire Now
Tel: +86 15612044421
Product Introduction
CA1500 is a macroporous strong acid cation exchange resin in H+ form for use as a catalyst. Main applications: etherification, aromatic alkylation and phenol purification.
Typical Physical & Chemical Properties
| Polymer matrix | Macroporous polystyrene crosslinked with divinylbenzene |
|---|---|
| Appearance | Spherical granules |
| Functional group | Sulfonic acid |
| Ionic form | H+ form |
| Dry weight capacity (min) | 5.1 eq/kg (H+ form) |
| Water retention | 54–59 % (H+ form) |
| Particle size distribution | 425 - 1200 µm |
| < 425 µm (max) | 2 % |
| Uniformity coefficient (max) | 1.7 |
| Surface area | 15 - 25 m²/g |
| Pore volume | 0.15 - 0.3 mL/g |
| Average pore diameter | 250 - 400 Å |
| Specific gravity | 1.18 |
| Packaging density (approx.) | 740 - 775 g/L (46.2 - 48.4 lb/ft³) |
| Temperature limit | 150 °C (302.0 °F) |
Handling, Storage & Loading Notes
- Transport & storage. Store the resin in its wet state, preferably above 0 °C. For long idle periods, keep the container closed or add brine of ≥5% NaCl. Protect from freezing during transport, and do not stack heavy objects on top of the resin to avoid crushing the beads.
- Pre-treatment. For general requirements, one alkaline → water → acid → water cycle is sufficient; for strict requirements, perform three cycles and finish with the required ionic form.
- Loading. Allow for the swelling on form conversion and leave enough freeboard to prevent overflow while keeping a proper liquid level. Keep the column aspect ratio in a reasonable range to avoid channeling. Load wet or backwash to remove air bubbles from the bed.
- Feed quality. Before entering the resin column, the liquid should be coagulated, filtered or sand-filtered to ensure it is free of suspended solids that could clog the resin pores.
- Idle columns. Resin left idle in a column for a long time must be washed out and stored clean, or kept submerged in brine; it must never dehydrate. Backwash from time to time to loosen the bed and prevent caking.